|Glue Material:||All Kinds Of Two-component Glue, Such As Double-liquid Glue, AB Glue, Silica Gel, Epoxy Resin, PU Glue And So On||Glue Mixing Machine:||AB Glue Mixing Machine|
|Power Supply:||Power Supply Glue Potting Machine||Automatic Glue Potting Machine:||Automatic Glue Potting Machine|
|LED Module Glue Potting Machine:||P5, P6, P8 And P10 Of Display Screen|
Application scope of semi-automatic dispensing machine:
Mainly in the electronics industry, LED industry, handicraft industry widely used in: LED all sleeving soft light strip irrigation and lamps, waterproof power supply, handicrafts, filters, filters, LED soft light strip, hard light strip and other products irrigation, high flexibility handheld adhesive technology;It is also widely used in other industries.
|1||Glue Ratio||2:1 to1:1 Can be adjust in this ratio|
|2||Stirring Method||Dynamic stirring|
|3||Work table||Configure yourself|
|4||Programming method||figure programming|
|6||Pump A||Gear pump|
|7||Pump B||Gear pump|
|8||Glue Barrel Volume||A:40L ,B:20L|
|9||Squeeze Glue Nozzle||Single with standard , can be customized multi nozzle|
|10||Input air pressure||0.5-0.7Mpa|
|1||Control System||PLC+ SCM +7.2 inch touch screen|
|2||Software System||Independent research and development, English interface|
|3||Stepper motor||YAKO independent research and development|
|4||Cut-off System||Independent research and development manufacturing|
|5||Mixing Arrangement||Independent research and development manufacturing|
|6||Cleaning System||Gas-liquid Cleaning|
|7||Rack Material||Steel Structure|
|8||Slide Parts||A3*3mm Independent research and development manufacturing|
|1||English Operate interface||
Anti-dumbing-type operation program design, simple operation, practical, ordinary workers can learn in 5 minutes
You know operation easily
|2||Import electronic control system||
Main electrical wiring, dust, anti - static, are up to foreign standards
Adopt sinjie PLC
Overload protection for all motors
|3||Glue Volum testing feedback function||The glue drum is equipped with the function of low liquid level alarm|
|4||Four times protection of glue filtration||Filter protection measures, reduce the mechanical pump failure probability, prevent the impurities in the glue into the glue pipe|
|5||High precision mechanical pump body||Precision adjustment wear resistant|
|6||Fully automatic mechanical stirring||The mixing speed of AB glue can be adjusted from 0 to 3000rpm by dynamic and mechanical stirring|
|7||Glue barrel heating||Imported high quality and reliable safety coefficient of silica gel sheet heating, super protection|
Main features of glue dispensing
1) this device is designed to provide adhesive irrigation for customers' products like LED power supply, point light source, buried lamp and wall washing lamp. It is convenient and flexible to use handheld adhesive irrigation.
2) different two-component glues, such as silica gel, epoxy resin, PU adhesive, polyurethane, UV adhesive, etc.
3) you can check the operation and proofing effect of the equipment by making samples on site, or send video with good shooting proofing to you for specific information.
4) multiple (touch screen, foot pedal, hand-held glue head) control glue release to ensure even glue release.
5) the material barrel is equipped with a heating system to make the glue flow better and guarantee the pouring quality;
6) with automatic pressure induction, timing glue discharging and automatic cleaning function, automatic glue mixing function.
7) independent research and development of core technology, high service dynamic mixing system, unique selection of sealing design, to ensure even mixing;
8) equipped with AB cleaning 3 drums, can place the corresponding glue, and the cleaning cylinder is automatically cleaned by adding the corresponding cleaning liquid after filling the glue.
Suitable for all kinds of two-component glue: silica gel, UV glue, AB glue, epoxy resin, etc.